POST: 0123456789bcefghips1234ajklnopqr,,,tvwxy comBIOS ver. 1.40a 20110906 Copyright (C) 2000-2011 Soekris Engineering. net6501 CPU Atom E6xx 1009 Mhz 0000 Mbyte Memory 1024 Initializing Intel(R) Boot Agent GE v1.3.72 PXE 2.1 Build 089 (WfM 2.0) SATA AHCI BIOS ver. 0.6 20110902 Copyright (C) 2003-2011 Intel Corporation Controller Bus#02, Device#06, Function#00: 02 Ports, 01 Devices Port-00: Hard Disk, KS-S12-S50 Port-01: No device detected Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int -------------------------------------------------------------------- 00:00:0 8086 4114 06000003 0007 0000 00 00 00 00000000 00000000 00:23:0 8086 8184 06040000 0107 0010 08 00 01 1FFF1000 A0FFA000 10 00:24:0 8086 8185 06040000 0107 0010 08 00 01 3FFF2000 A2FFA100 11 00:25:0 8086 8180 06040000 0107 0010 08 00 01 5FFF4000 A4FFA300 05 00:26:0 8086 8181 06040000 0107 0010 08 00 01 0FFF1000 00FFA000 09 00:31:0 8086 8186 06010000 0003 0000 00 00 80 00000000 00000000 02:02:0 8086 8804 0C031001 0106 0010 00 00 80 A0000900 00000000 09 02:02:1 8086 8805 0C031001 0106 0010 00 00 80 A0000A00 00000000 09 02:02:2 8086 8806 0C031001 0106 0010 00 00 80 A0000B00 00000000 09 02:02:3 8086 8807 0C032001 0106 0010 00 00 80 A0000C00 00000000 09 02:06:0 8086 880B 01060101 0107 0010 00 00 00 00000000 00000000 11 02:08:0 8086 880C 0C031001 0106 0010 00 00 80 A0004400 00000000 10 02:08:1 8086 880D 0C031001 0106 0010 00 00 80 A0004500 00000000 10 02:08:2 8086 880E 0C031001 0106 0010 00 00 80 A0004600 00000000 10 02:08:3 8086 880F 0C032001 0106 0010 00 00 80 A0004700 00000000 10 02:10:1 8086 8811 07000200 0107 0010 00 00 80 00001021 A0004800 09 02:10:2 8086 8812 07000200 0107 0010 00 00 80 00001029 A0004810 09 02:12:2 8086 8817 0C800000 0106 0010 00 00 80 00000000 A0004900 05 02:12:3 8086 8818 0C090000 0106 0010 00 00 80 00000000 A0004A00 05 03:00:0 111D 803A 0604000E 0107 0010 08 00 01 3FFF2000 A2FFA100 05:00:0 8086 10D3 02000000 0107 0010 08 00 00 A1000000 00000000 09 06:00:0 8086 10D3 02000000 0107 0010 08 00 00 A2000000 00000000 10 08:00:0 111D 803A 0604000E 0107 0010 08 00 01 5FFF4000 A4FFA300 10:00:0 8086 10D3 02000000 0107 0010 08 00 00 A3000000 00000000 10 11:00:0 8086 10D3 02000000 0107 0010 08 00 00 A4000000 00000000 11 Seconds to automatic boot. Press Ctrl-P for entering Monitor. 5 4 3 2 1 GRUB loading. GNU GRUB version 1.98+20100804-14 +--------------------------------------------------------------------------+ |Debian GNU/Linux, with Linux 2.6.32-5-686 | |Debian GNU/Linux, with Linux 2.6.32-5-686 (recovery mode) | | | | | | | | | | | | | | | | | | | +--------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, 'e' to edit the commands before booting or 'c' for a command-line. Loading Linux 2.6.32-5-686 ... Loading initial ramdisk ... [ 0.000000] MPTABLE: checksum error! [ 0.000000] BIOS bug, MP table errors detected!... [ 0.000000] ... disabling SMP support. (tell your hw vendor) [ 0.202914] pci 0000:02:00.0: BAR 6: no parent found for of device [0x98000000-0x9801ffff] [ 0.252436] pci 0000:02:06.0: BAR 6: no parent found for of device [0x98000000-0x9801ffff] [ 1.797103] i8042.c: No controller found. Loading, please wait... [ 2.894768] sdhci-pci 0000:02:04.0: Invalid iomem size. You may experience problems. [ 3.064688] sdhci-pci 0000:02:04.1: Invalid iomem size. You may experience problems. INIT: version 2.88 booting Using makefile-style concurrent boot in runlevel S. Starting the hotplug events dispatcher: udevd. Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...[ 6.128901] Error: Driver 'pcspkr' is already registered, aborting... done. Activating swap...done. Checking root file system...fsck from util-linux-ng 2.17.2 /dev/sda1: clean, 28427/2927008 files, 372766/11705352 blocks done. Cleaning up ifupdown.... Loading kernel modules...done. Setting up networking.... Activating lvm and md swap...done. Checking file systems...fsck from util-linux-ng 2.17.2 done. Mounting local filesystems...done. Activating swapfile swap...done. Cleaning up temporary files.... Setting kernel variables ...done. Configuring network interfaces...done. Starting portmap daemon.... Starting NFS common utilities: statd. Cleaning up temporary files.... INIT: Entering runlevel: 2 Using makefile-style concurrent boot in runlevel 2. Starting portmap daemon...Already running.. Starting NFS common utilities: statd. Starting enhanced syslogd: rsyslogd. Starting deferred execution scheduler: atd. Starting domain name service...: bind9. Starting domain name service: lwresd. Starting web server: apache2. Starting periodic command scheduler: cron. Starting MTA: exim4. Debian GNU/Linux 6.0 debian ttyS0 debian login: root Password: Last login: Thu Sep 15 13:16:50 BST 2011 on ttyS0 Linux debian 2.6.32-5-686 #1 SMP Fri Sep 9 20:51:05 UTC 2011 i686 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@debian:~# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:00:24:ce:45:74 inet addr:10.32.87.147 Bcast:10.32.87.255 Mask:255.255.255.0 inet6 addr: fe80::200:24ff:fece:4574/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:786 (786.0 B) TX bytes:1152 (1.1 KiB) Memory:a1000000-a1020000 eth1 Link encap:Ethernet HWaddr 00:00:24:ce:45:75 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Memory:a2000000-a2020000 eth2 Link encap:Ethernet HWaddr 00:00:24:ce:45:76 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Memory:a3000000-a3020000 eth3 Link encap:Ethernet HWaddr 00:00:24:ce:45:77 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Memory:a4000000-a4020000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:23 errors:0 dropped:0 overruns:0 frame:0 TX packets:23 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2036 (1.9 KiB) TX bytes:2036 (1.9 KiB) root@debian:~# dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-35squeeze2) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Sep 9 20:51:05 UTC 2011 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 00000000000f0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000040000000 (usable) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI not present or invalid. [ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037000000 page 2M [ 0.000000] 0037000000 - 00373fe000 page 4k [ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000 [ 0.000000] RAMDISK: 2f805000 - 3003f61a [ 0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219) [ 0.000000] 140MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 0 - 373fe000 [ 0.000000] node 0 low ram: 00000000 - 373fe000 [ 0.000000] node 0 bootmap 00009000 - 0000fe80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00014ccbd4] TEXT DATA BSS ==> [0001000000 - 00014ccbd4] [ 0.000000] #4 [002f805000 - 003003f61a] RAMDISK ==> [002f805000 - 003003f61a] [ 0.000000] #5 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] [ 0.000000] #6 [00014cd000 - 00014d3000] BRK ==> [00014cd000 - 00014d3000] [ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] [ 0.000000] found SMP MP-table at [c00fe100] fe100 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x00040000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x00040000 [ 0.000000] On node 0 totalpages: 262046 [ 0.000000] free_area_init_node: node 0, pgdat c13b4860, node_mem_map c14d4000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3966 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 281 pages used for memmap [ 0.000000] HighMem zone: 35561 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: checksum error! [ 0.000000] BIOS bug, MP table errors detected!... [ 0.000000] ... disabling SMP support. (tell your hw vendor) [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Found and enabled local APIC! [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34328 r0 d23016 u4194304 [ 0.000000] pcpu-alloc: s34328 r0 d23016 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259997 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=4f588d6a-54c8-45a1-9150-b198c346ce70 ro console=ttyS0,19200 earlyprint=serial,ttyS0,19200 quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000373fe:00040000) [ 0.000000] Memory: 1025352k/1048576k available (2503k kernel code, 22468k reserved, 1329k data, 380k init, 143368k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB) [ 0.000000] .data : 0xc1271d79 - 0xc13be480 (1329 kB) [ 0.000000] .text : 0xc1000000 - 0xc1271d79 (2503 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 999.909 MHz processor. [ 0.008012] Calibrating delay loop (skipped), value calculated using timer frequency.. 1999.81 BogoMIPS (lpj=3999636) [ 0.008088] Security Framework initialized [ 0.008106] SELinux: Disabled at boot. [ 0.008141] Mount-cache hash table entries: 512 [ 0.012301] Initializing cgroup subsys ns [ 0.012320] Initializing cgroup subsys cpuacct [ 0.012342] Initializing cgroup subsys devices [ 0.012356] Initializing cgroup subsys freezer [ 0.012369] Initializing cgroup subsys net_cls [ 0.012457] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.012473] CPU: L2 cache: 512K [ 0.012486] CPU: Unsupported number of siblings 2 [ 0.012501] mce: CPU supports 5 MCE banks [ 0.012525] Disabling lock debugging due to kernel taint [ 0.012550] CPU0: Thermal monitoring enabled (TM1) [ 0.012567] using mwait in idle threads. [ 0.012590] Performance Events: Nehalem/Corei7 events, Intel PMU driver. [ 0.012621] ... version: 3 [ 0.012632] ... bit width: 40 [ 0.012642] ... generic registers: 2 [ 0.012653] ... value mask: 000000ffffffffff [ 0.012665] ... max period: 000000007fffffff [ 0.012676] ... fixed-purpose events: 3 [ 0.012687] ... event mask: 0000000700000003 [ 0.012705] Checking 'hlt' instruction... OK. [ 0.029054] SMP alternatives: switching to UP code [ 0.040607] Freeing SMP alternatives: 13k freed [ 0.040804] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.040818] weird, boot CPU (#0) not listed by the BIOS. [ 0.040827] SMP motherboard not detected. [ 0.148033] SMP disabled [ 0.148447] Brought up 1 CPUs [ 0.148463] Total of 1 processors activated (1999.81 BogoMIPS). [ 0.148502] CPU0 attaching NULL sched-domain. [ 0.148936] devtmpfs: initialized [ 0.150944] regulator: core version 0.5 [ 0.151184] NET: Registered protocol family 16 [ 0.152189] PCI: PCI BIOS revision 2.01 entry at 0xfac61, last bus=13 [ 0.152203] PCI: Using configuration type 1 for base access [ 0.154157] bio: create slab at 0 [ 0.154438] ACPI: Interpreter disabled. [ 0.154661] vgaarb: loaded [ 0.154940] PCI: Probing PCI hardware [ 0.154954] PCI: Probing PCI hardware (bus 00) [ 0.155430] pci 0000:00:17.0: PME# supported from D0 D3hot D3cold [ 0.155450] pci 0000:00:17.0: PME# disabled [ 0.155603] pci 0000:00:18.0: PME# supported from D0 D3hot D3cold [ 0.155622] pci 0000:00:18.0: PME# disabled [ 0.155773] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.155791] pci 0000:00:19.0: PME# disabled [ 0.155943] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.155961] pci 0000:00:1a.0: PME# disabled [ 0.156287] pci 0000:01:00.0: reg 38 32bit mmio pref: [0x000000-0x00ffff] [ 0.156368] pci 0000:01:00.0: supports D1 [ 0.156382] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.156401] pci 0000:01:00.0: PME# disabled [ 0.164163] pci 0000:00:17.0: bridge io port: [0x1000-0x1fff] [ 0.164185] pci 0000:00:17.0: bridge 32bit mmio: [0xa0000000-0xa0ffffff] [ 0.164338] pci 0000:02:00.0: reg 14 32bit mmio: [0xa0000000-0xa00007ff] [ 0.164421] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x98000000-0x9801ffff] [ 0.164629] pci 0000:02:00.1: reg 10 io port: [0x00-0x1f] [ 0.164659] pci 0000:02:00.1: reg 14 32bit mmio: [0x000000-0x0001ff] [ 0.164807] pci 0000:02:00.1: PME# supported from D0 [ 0.164827] pci 0000:02:00.1: PME# disabled [ 0.164975] pci 0000:02:00.2: reg 14 32bit mmio: [0xa0000800-0xa000083f] [ 0.165124] pci 0000:02:00.2: PME# supported from D0 [ 0.165143] pci 0000:02:00.2: PME# disabled [ 0.165319] pci 0000:02:02.0: reg 10 32bit mmio: [0xa0000900-0xa00009ff] [ 0.165481] pci 0000:02:02.0: PME# supported from D0 D3hot [ 0.165500] pci 0000:02:02.0: PME# disabled [ 0.165636] pci 0000:02:02.1: reg 10 32bit mmio: [0xa0000a00-0xa0000aff] [ 0.165797] pci 0000:02:02.1: PME# supported from D0 D3hot [ 0.165817] pci 0000:02:02.1: PME# disabled [ 0.165952] pci 0000:02:02.2: reg 10 32bit mmio: [0xa0000b00-0xa0000bff] [ 0.166113] pci 0000:02:02.2: PME# supported from D0 D3hot [ 0.166133] pci 0000:02:02.2: PME# disabled [ 0.166295] pci 0000:02:02.3: reg 10 32bit mmio: [0xa0000c00-0xa0000cff] [ 0.166469] pci 0000:02:02.3: PME# supported from D0 D3hot [ 0.166489] pci 0000:02:02.3: PME# disabled [ 0.166643] pci 0000:02:02.4: reg 14 32bit mmio: [0xa0002000-0xa0003fff] [ 0.166792] pci 0000:02:02.4: PME# supported from D0 [ 0.166811] pci 0000:02:02.4: PME# disabled [ 0.166981] pci 0000:02:04.0: reg 10 32bit mmio: [0x000000-0x0001ff] [ 0.167262] pci 0000:02:04.1: reg 10 32bit mmio: [0x000000-0x0001ff] [ 0.167659] pci 0000:02:06.0: reg 20 io port: [0x1000-0x101f] [ 0.167690] pci 0000:02:06.0: reg 24 32bit mmio: [0xa0004000-0xa00043ff] [ 0.167721] pci 0000:02:06.0: reg 30 32bit mmio pref: [0x98000000-0x9801ffff] [ 0.167969] pci 0000:02:08.0: reg 10 32bit mmio: [0xa0004400-0xa00044ff] [ 0.168148] pci 0000:02:08.0: PME# supported from D0 D3hot [ 0.168168] pci 0000:02:08.0: PME# disabled [ 0.168306] pci 0000:02:08.1: reg 10 32bit mmio: [0xa0004500-0xa00045ff] [ 0.168467] pci 0000:02:08.1: PME# supported from D0 D3hot [ 0.168487] pci 0000:02:08.1: PME# disabled [ 0.168622] pci 0000:02:08.2: reg 10 32bit mmio: [0xa0004600-0xa00046ff] [ 0.168784] pci 0000:02:08.2: PME# supported from D0 D3hot [ 0.168803] pci 0000:02:08.2: PME# disabled [ 0.168965] pci 0000:02:08.3: reg 10 32bit mmio: [0xa0004700-0xa00047ff] [ 0.169140] pci 0000:02:08.3: PME# supported from D0 D3hot [ 0.169159] pci 0000:02:08.3: PME# disabled [ 0.169373] pci 0000:02:0a.0: reg 14 32bit mmio: [0x000000-0x0000ff] [ 0.169662] pci 0000:02:0a.1: reg 10 io port: [0x1020-0x1027] [ 0.169693] pci 0000:02:0a.1: reg 14 32bit mmio: [0xa0004800-0xa000480f] [ 0.169841] pci 0000:02:0a.1: PME# supported from D0 [ 0.169860] pci 0000:02:0a.1: PME# disabled [ 0.169995] pci 0000:02:0a.2: reg 10 io port: [0x1028-0x102f] [ 0.170026] pci 0000:02:0a.2: reg 14 32bit mmio: [0xa0004810-0xa000481f] [ 0.170296] pci 0000:02:0a.3: reg 10 io port: [0x00-0x07] [ 0.170326] pci 0000:02:0a.3: reg 14 32bit mmio: [0x000000-0x00000f] [ 0.170595] pci 0000:02:0a.4: reg 10 io port: [0x00-0x07] [ 0.170624] pci 0000:02:0a.4: reg 14 32bit mmio: [0x000000-0x00000f] [ 0.170963] pci 0000:02:0c.0: reg 14 32bit mmio: [0x000000-0x0000ff] [ 0.171264] pci 0000:02:0c.1: reg 14 32bit mmio: [0x000000-0x00001f] [ 0.171553] pci 0000:02:0c.2: reg 14 32bit mmio: [0xa0004900-0xa00049ff] [ 0.171836] pci 0000:02:0c.3: reg 14 32bit mmio: [0xa0004a00-0xa0004bff] [ 0.172140] pci 0000:02:0c.4: reg 14 32bit mmio: [0x000000-0x0000ff] [ 0.172445] pci 0000:01:00.0: bridge io port: [0x1000-0x1fff] [ 0.172467] pci 0000:01:00.0: bridge 32bit mmio: [0xa0000000-0xa0ffffff] [ 0.172680] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.172700] pci 0000:03:00.0: PME# disabled [ 0.180149] pci 0000:00:18.0: bridge io port: [0x2000-0x3fff] [ 0.180170] pci 0000:00:18.0: bridge 32bit mmio: [0xa1000000-0xa2ffffff] [ 0.180361] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold [ 0.180381] pci 0000:04:02.0: PME# disabled [ 0.180573] pci 0000:04:03.0: PME# supported from D0 D3hot D3cold [ 0.180592] pci 0000:04:03.0: PME# disabled [ 0.180796] pci 0000:04:04.0: PME# supported from D0 D3hot D3cold [ 0.180815] pci 0000:04:04.0: PME# disabled [ 0.180981] pci 0000:03:00.0: bridge io port: [0x2000-0x3fff] [ 0.181003] pci 0000:03:00.0: bridge 32bit mmio: [0xa1000000-0xa2ffffff] [ 0.181158] pci 0000:05:00.0: reg 10 32bit mmio: [0xa1000000-0xa101ffff] [ 0.181208] pci 0000:05:00.0: reg 18 io port: [0x2000-0x201f] [ 0.181241] pci 0000:05:00.0: reg 1c 32bit mmio: [0xa1020000-0xa1023fff] [ 0.181402] pci 0000:05:00.0: PME# supported from D0 D3hot [ 0.181423] pci 0000:05:00.0: PME# disabled [ 0.181822] pci 0000:04:02.0: bridge io port: [0x2000-0x2fff] [ 0.181843] pci 0000:04:02.0: bridge 32bit mmio: [0xa1000000-0xa1ffffff] [ 0.182012] pci 0000:06:00.0: reg 10 32bit mmio: [0xa2000000-0xa201ffff] [ 0.182062] pci 0000:06:00.0: reg 18 io port: [0x3000-0x301f] [ 0.182096] pci 0000:06:00.0: reg 1c 32bit mmio: [0xa2020000-0xa2023fff] [ 0.182257] pci 0000:06:00.0: PME# supported from D0 D3hot [ 0.182278] pci 0000:06:00.0: PME# disabled [ 0.182675] pci 0000:04:03.0: bridge io port: [0x3000-0x3fff] [ 0.182697] pci 0000:04:03.0: bridge 32bit mmio: [0xa2000000-0xa2ffffff] [ 0.183083] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.183103] pci 0000:08:00.0: PME# disabled [ 0.188147] pci 0000:00:19.0: bridge io port: [0x4000-0x5fff] [ 0.188168] pci 0000:00:19.0: bridge 32bit mmio: [0xa3000000-0xa4ffffff] [ 0.188359] pci 0000:09:02.0: PME# supported from D0 D3hot D3cold [ 0.188379] pci 0000:09:02.0: PME# disabled [ 0.188571] pci 0000:09:03.0: PME# supported from D0 D3hot D3cold [ 0.188591] pci 0000:09:03.0: PME# disabled [ 0.188794] pci 0000:09:04.0: PME# supported from D0 D3hot D3cold [ 0.188813] pci 0000:09:04.0: PME# disabled [ 0.188979] pci 0000:08:00.0: bridge io port: [0x4000-0x5fff] [ 0.189000] pci 0000:08:00.0: bridge 32bit mmio: [0xa3000000-0xa4ffffff] [ 0.189156] pci 0000:0a:00.0: reg 10 32bit mmio: [0xa3000000-0xa301ffff] [ 0.189206] pci 0000:0a:00.0: reg 18 io port: [0x4000-0x401f] [ 0.189239] pci 0000:0a:00.0: reg 1c 32bit mmio: [0xa3020000-0xa3023fff] [ 0.189401] pci 0000:0a:00.0: PME# supported from D0 D3hot [ 0.189422] pci 0000:0a:00.0: PME# disabled [ 0.189820] pci 0000:09:02.0: bridge io port: [0x4000-0x4fff] [ 0.189841] pci 0000:09:02.0: bridge 32bit mmio: [0xa3000000-0xa3ffffff] [ 0.190010] pci 0000:0b:00.0: reg 10 32bit mmio: [0xa4000000-0xa401ffff] [ 0.190060] pci 0000:0b:00.0: reg 18 io port: [0x5000-0x501f] [ 0.190094] pci 0000:0b:00.0: reg 1c 32bit mmio: [0xa4020000-0xa4023fff] [ 0.190255] pci 0000:0b:00.0: PME# supported from D0 D3hot [ 0.190276] pci 0000:0b:00.0: PME# disabled [ 0.190674] pci 0000:09:03.0: bridge io port: [0x5000-0x5fff] [ 0.190695] pci 0000:09:03.0: bridge 32bit mmio: [0xa4000000-0xa4ffffff] [ 0.199079] Switching to clocksource tsc [ 0.201580] pnp: PnP ACPI: disabled [ 0.201597] PnPBIOS: Scanning system for PnP BIOS support... [ 0.201823] PnPBIOS: PnP BIOS support was not detected. [ 0.202914] pci 0000:02:00.0: BAR 6: no parent found for of device [0x98000000-0x9801ffff] [ 0.252436] pci 0000:02:06.0: BAR 6: no parent found for of device [0x98000000-0x9801ffff] [ 0.302312] pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 [ 0.302332] pci 0000:01:00.0: IO window: 0x1000-0x1fff [ 0.302356] pci 0000:01:00.0: MEM window: 0xa0000000-0xa0ffffff [ 0.302378] pci 0000:01:00.0: PREFETCH window: 0x40000000-0x400fffff [ 0.302405] pci 0000:00:17.0: PCI bridge, secondary bus 0000:01 [ 0.302422] pci 0000:00:17.0: IO window: 0x1000-0x1fff [ 0.302443] pci 0000:00:17.0: MEM window: 0xa0000000-0xa0ffffff [ 0.302463] pci 0000:00:17.0: PREFETCH window: 0x40000000-0x401fffff [ 0.302490] pci 0000:04:02.0: PCI bridge, secondary bus 0000:05 [ 0.302508] pci 0000:04:02.0: IO window: 0x2000-0x2fff [ 0.302531] pci 0000:04:02.0: MEM window: 0xa1000000-0xa1ffffff [ 0.302549] pci 0000:04:02.0: PREFETCH window: disabled [ 0.302576] pci 0000:04:03.0: PCI bridge, secondary bus 0000:06 [ 0.302593] pci 0000:04:03.0: IO window: 0x3000-0x3fff [ 0.302616] pci 0000:04:03.0: MEM window: 0xa2000000-0xa2ffffff [ 0.302634] pci 0000:04:03.0: PREFETCH window: disabled [ 0.302660] pci 0000:04:04.0: PCI bridge, secondary bus 0000:07 [ 0.302672] pci 0000:04:04.0: IO window: disabled [ 0.302692] pci 0000:04:04.0: MEM window: disabled [ 0.302710] pci 0000:04:04.0: PREFETCH window: disabled [ 0.302735] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04 [ 0.302753] pci 0000:03:00.0: IO window: 0x2000-0x3fff [ 0.302776] pci 0000:03:00.0: MEM window: 0xa1000000-0xa2ffffff [ 0.302794] pci 0000:03:00.0: PREFETCH window: disabled [ 0.302819] pci 0000:00:18.0: PCI bridge, secondary bus 0000:03 [ 0.302836] pci 0000:00:18.0: IO window: 0x2000-0x3fff [ 0.302857] pci 0000:00:18.0: MEM window: 0xa1000000-0xa2ffffff [ 0.302874] pci 0000:00:18.0: PREFETCH window: disabled [ 0.302901] pci 0000:09:02.0: PCI bridge, secondary bus 0000:0a [ 0.302918] pci 0000:09:02.0: IO window: 0x4000-0x4fff [ 0.302941] pci 0000:09:02.0: MEM window: 0xa3000000-0xa3ffffff [ 0.302959] pci 0000:09:02.0: PREFETCH window: disabled [ 0.302986] pci 0000:09:03.0: PCI bridge, secondary bus 0000:0b [ 0.303003] pci 0000:09:03.0: IO window: 0x5000-0x5fff [ 0.303026] pci 0000:09:03.0: MEM window: 0xa4000000-0xa4ffffff [ 0.303044] pci 0000:09:03.0: PREFETCH window: disabled [ 0.303070] pci 0000:09:04.0: PCI bridge, secondary bus 0000:0c [ 0.303082] pci 0000:09:04.0: IO window: disabled [ 0.303102] pci 0000:09:04.0: MEM window: disabled [ 0.303119] pci 0000:09:04.0: PREFETCH window: disabled [ 0.303145] pci 0000:08:00.0: PCI bridge, secondary bus 0000:09 [ 0.303162] pci 0000:08:00.0: IO window: 0x4000-0x5fff [ 0.303185] pci 0000:08:00.0: MEM window: 0xa3000000-0xa4ffffff [ 0.303203] pci 0000:08:00.0: PREFETCH window: disabled [ 0.303229] pci 0000:00:19.0: PCI bridge, secondary bus 0000:08 [ 0.303245] pci 0000:00:19.0: IO window: 0x4000-0x5fff [ 0.303266] pci 0000:00:19.0: MEM window: 0xa3000000-0xa4ffffff [ 0.303283] pci 0000:00:19.0: PREFETCH window: disabled [ 0.303306] pci 0000:00:1a.0: PCI bridge, secondary bus 0000:0d [ 0.303318] pci 0000:00:1a.0: IO window: disabled [ 0.303336] pci 0000:00:1a.0: MEM window: disabled [ 0.303352] pci 0000:00:1a.0: PREFETCH window: disabled [ 0.303401] pci 0000:00:17.0: setting latency timer to 64 [ 0.303448] pci 0000:01:00.0: setting latency timer to 64 [ 0.303485] pci 0000:00:18.0: setting latency timer to 64 [ 0.303526] pci 0000:03:00.0: setting latency timer to 64 [ 0.303563] pci 0000:04:02.0: setting latency timer to 64 [ 0.303601] pci 0000:04:03.0: setting latency timer to 64 [ 0.303639] pci 0000:04:04.0: setting latency timer to 64 [ 0.303674] pci 0000:00:19.0: setting latency timer to 64 [ 0.303714] pci 0000:08:00.0: setting latency timer to 64 [ 0.303752] pci 0000:09:02.0: setting latency timer to 64 [ 0.303790] pci 0000:09:03.0: setting latency timer to 64 [ 0.303827] pci 0000:09:04.0: setting latency timer to 64 [ 0.303863] pci 0000:00:1a.0: setting latency timer to 64 [ 0.303883] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.303900] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.303917] pci_bus 0000:01: resource 0 io: [0x1000-0x1fff] [ 0.303934] pci_bus 0000:01: resource 1 mem: [0xa0000000-0xa0ffffff] [ 0.303951] pci_bus 0000:01: resource 2 pref mem [0x40000000-0x401fffff] [ 0.303969] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff] [ 0.303985] pci_bus 0000:02: resource 1 mem: [0xa0000000-0xa0ffffff] [ 0.304003] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x400fffff] [ 0.304022] pci_bus 0000:03: resource 0 io: [0x2000-0x3fff] [ 0.304038] pci_bus 0000:03: resource 1 mem: [0xa1000000-0xa2ffffff] [ 0.304055] pci_bus 0000:04: resource 0 io: [0x2000-0x3fff] [ 0.304072] pci_bus 0000:04: resource 1 mem: [0xa1000000-0xa2ffffff] [ 0.304089] pci_bus 0000:05: resource 0 io: [0x2000-0x2fff] [ 0.304106] pci_bus 0000:05: resource 1 mem: [0xa1000000-0xa1ffffff] [ 0.304123] pci_bus 0000:06: resource 0 io: [0x3000-0x3fff] [ 0.304140] pci_bus 0000:06: resource 1 mem: [0xa2000000-0xa2ffffff] [ 0.304158] pci_bus 0000:08: resource 0 io: [0x4000-0x5fff] [ 0.304174] pci_bus 0000:08: resource 1 mem: [0xa3000000-0xa4ffffff] [ 0.304191] pci_bus 0000:09: resource 0 io: [0x4000-0x5fff] [ 0.304208] pci_bus 0000:09: resource 1 mem: [0xa3000000-0xa4ffffff] [ 0.304225] pci_bus 0000:0a: resource 0 io: [0x4000-0x4fff] [ 0.304242] pci_bus 0000:0a: resource 1 mem: [0xa3000000-0xa3ffffff] [ 0.304259] pci_bus 0000:0b: resource 0 io: [0x5000-0x5fff] [ 0.304276] pci_bus 0000:0b: resource 1 mem: [0xa4000000-0xa4ffffff] [ 0.304430] NET: Registered protocol family 2 [ 0.304917] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.306496] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.309103] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.310288] TCP: Hash tables configured (established 131072 bind 65536) [ 0.310303] TCP reno registered [ 0.310691] NET: Registered protocol family 1 [ 0.311421] Unpacking initramfs... [ 1.384481] Freeing initrd memory: 8425k freed [ 1.397818] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 1.398869] audit: initializing netlink socket (disabled) [ 1.398915] type=2000 audit(1316089519.396:1): initialized [ 1.414330] highmem bounce pool size: 64 pages [ 1.414357] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.422681] VFS: Disk quotas dquot_6.5.2 [ 1.422978] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.423353] msgmni has been set to 1739 [ 1.424268] alg: No test for stdrng (krng) [ 1.424548] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.424566] io scheduler noop registered [ 1.424577] io scheduler anticipatory registered [ 1.424589] io scheduler deadline registered [ 1.424811] io scheduler cfq registered (default) [ 1.425551] pcieport 0000:00:17.0: setting latency timer to 64 [ 1.425803] pcieport 0000:00:18.0: setting latency timer to 64 [ 1.426037] pcieport 0000:00:19.0: setting latency timer to 64 [ 1.426268] pcieport 0000:00:1a.0: setting latency timer to 64 [ 1.426751] pcieport 0000:04:02.0: irq 16 for MSI/MSI-X [ 1.426784] pcieport 0000:04:02.0: setting latency timer to 64 [ 1.426982] pcieport 0000:04:03.0: irq 17 for MSI/MSI-X [ 1.427014] pcieport 0000:04:03.0: setting latency timer to 64 [ 1.427208] pcieport 0000:04:04.0: irq 18 for MSI/MSI-X [ 1.427241] pcieport 0000:04:04.0: setting latency timer to 64 [ 1.427530] pcieport 0000:09:02.0: irq 19 for MSI/MSI-X [ 1.427561] pcieport 0000:09:02.0: setting latency timer to 64 [ 1.427756] pcieport 0000:09:03.0: irq 20 for MSI/MSI-X [ 1.427787] pcieport 0000:09:03.0: setting latency timer to 64 [ 1.427981] pcieport 0000:09:04.0: irq 21 for MSI/MSI-X [ 1.428012] pcieport 0000:09:04.0: setting latency timer to 64 [ 1.428509] isapnp: Scanning for PnP cards... [ 1.784462] isapnp: No Plug & Play device found [ 1.792327] Linux agpgart interface v0.103 [ 1.793175] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.793401] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a TI16750 [ 1.794537] 0000:02:0a.1: ttyS1 at I/O 0x1020 (irq = 9) is a 16550A [ 1.795004] 0000:02:0a.2: ttyS2 at I/O 0x1028 (irq = 9) is a 16550A [ 1.795203] serial 0000:02:0a.3: enabling device (0000 -> 0003) [ 1.795231] serial 0000:02:0a.3: can't find IRQ for PCI INT B; please try using pci=biosirq [ 1.795508] 0000:02:0a.3: ttyS3 at I/O 0x1030 (irq = 0) is a 16550A [ 1.795707] serial 0000:02:0a.4: enabling device (0000 -> 0003) [ 1.795733] serial 0000:02:0a.4: can't find IRQ for PCI INT B; please try using pci=biosirq [ 1.795754] Couldn't register serial port 0000:02:0a.4: -28 [ 1.796181] PNP: No PS/2 controller found. Probing ports directly. [ 1.797103] i8042.c: No controller found. [ 1.821281] mice: PS/2 mouse device common for all mice [ 1.821611] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 1.821668] rtc0: alarms up to one day, 114 bytes nvram [ 1.821712] cpuidle: using governor ladder [ 1.821725] cpuidle: using governor menu [ 1.821746] No iBFT detected. [ 1.823794] TCP cubic registered [ 1.824593] NET: Registered protocol family 10 [ 1.828937] Mobile IPv6 [ 1.828955] NET: Registered protocol family 17 [ 1.829047] Using IPI No-Shortcut mode [ 1.829443] PM: Resume from disk failed. [ 1.829492] registered taskstats version 1 [ 1.832446] rtc_cmos rtc_cmos: setting system clock to 2011-09-15 12:25:20 UTC (1316089520) [ 1.832735] Initalizing network drop monitor service [ 1.832837] Freeing unused kernel memory: 380k freed [ 1.833482] Write protecting the kernel text: 2504k [ 1.833578] Write protecting the kernel read-only data: 924k [ 1.833766] spurious 8259A interrupt: IRQ7. [ 1.921425] udev[44]: starting version 164 [ 2.646244] usbcore: registered new interface driver usbfs [ 2.647108] usbcore: registered new interface driver hub [ 2.648002] usbcore: registered new device driver usb [ 2.670686] SCSI subsystem initialized [ 2.695903] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.696078] ehci_hcd 0000:02:02.3: setting latency timer to 64 [ 2.696098] ehci_hcd 0000:02:02.3: EHCI Host Controller [ 2.696202] ehci_hcd 0000:02:02.3: new USB bus registered, assigned bus number 1 [ 2.712734] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 2.712752] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 2.712977] e1000e 0000:05:00.0: setting latency timer to 64 [ 2.713405] e1000e 0000:05:00.0: irq 22 for MSI/MSI-X [ 2.713424] e1000e 0000:05:00.0: irq 23 for MSI/MSI-X [ 2.713440] e1000e 0000:05:00.0: irq 24 for MSI/MSI-X [ 2.721873] ehci_hcd 0000:02:02.3: cache line size of 32 is not supported [ 2.721921] ehci_hcd 0000:02:02.3: irq 9, io mem 0xa0000c00 [ 2.722129] sdhci: Secure Digital Host Controller Interface driver [ 2.722141] sdhci: Copyright(c) Pierre Ossman [ 2.837486] ehci_hcd 0000:02:02.3: USB 2.0 started, EHCI 1.00 [ 2.837596] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.837614] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.837629] usb usb1: Product: EHCI Host Controller [ 2.837642] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd [ 2.837656] usb usb1: SerialNumber: 0000:02:02.3 [ 2.838085] usb usb1: configuration #1 chosen from 1 choice [ 2.838281] hub 1-0:1.0: USB hub found [ 2.838323] hub 1-0:1.0: 3 ports detected [ 2.838648] ehci_hcd 0000:02:08.3: setting latency timer to 64 [ 2.838667] ehci_hcd 0000:02:08.3: EHCI Host Controller [ 2.838717] ehci_hcd 0000:02:08.3: new USB bus registered, assigned bus number 2 [ 2.853888] libata version 3.00 loaded. [ 2.881519] ehci_hcd 0000:02:08.3: cache line size of 32 is not supported [ 2.881565] ehci_hcd 0000:02:08.3: irq 10, io mem 0xa0004700 [ 2.893143] ehci_hcd 0000:02:08.3: USB 2.0 started, EHCI 1.00 [ 2.893246] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.893264] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.893280] usb usb2: Product: EHCI Host Controller [ 2.893293] usb usb2: Manufacturer: Linux 2.6.32-5-686 ehci_hcd [ 2.893306] usb usb2: SerialNumber: 0000:02:08.3 [ 2.893953] usb usb2: configuration #1 chosen from 1 choice [ 2.894337] hub 2-0:1.0: USB hub found [ 2.894381] hub 2-0:1.0: 3 ports detected [ 2.894679] sdhci-pci 0000:02:04.0: SDHCI controller found [8086:8809] (rev 1) [ 2.894723] sdhci-pci 0000:02:04.0: enabling device (0000 -> 0002) [ 2.894750] sdhci-pci 0000:02:04.0: can't find IRQ for PCI INT C; please try using pci=biosirq [ 2.894768] sdhci-pci 0000:02:04.0: Invalid iomem size. You may experience problems. [ 2.988590] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.988742] sdhci-pci 0000:02:04.0: setting latency timer to 64 [ 2.988814] sdhci-pci: probe of 0000:02:04.0 failed with error -16 [ 2.988877] ahci 0000:02:06.0: version 3.0 [ 2.989046] ahci 0000:02:06.0: irq 25 for MSI/MSI-X [ 2.989196] ahci: SSS flag set, parallel bus scan disabled [ 2.989295] ahci 0000:02:06.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 2.989319] ahci 0000:02:06.0: flags: ncq sntf stag pm led clo only pmp pio slum part ccc [ 2.989342] ahci 0000:02:06.0: setting latency timer to 64 [ 2.994711] scsi0 : ahci [ 2.999177] 0000:05:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:00:24:ce:45:74 [ 2.999197] 0000:05:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 2.999299] 0000:05:00.0: eth0: MAC: 3, PHY: 8, PBA No: ffffff-0ff [ 2.999361] scsi1 : ahci [ 2.999646] ata1: SATA max UDMA/133 abar m1024@0xa0004000 port 0xa0004100 irq 25 [ 2.999667] ata2: SATA max UDMA/133 abar m1024@0xa0004000 port 0xa0004180 irq 25 [ 3.000539] ohci_hcd 0000:02:02.0: setting latency timer to 64 [ 3.000560] ohci_hcd 0000:02:02.0: OHCI Host Controller [ 3.000619] ohci_hcd 0000:02:02.0: new USB bus registered, assigned bus number 3 [ 3.000693] ohci_hcd 0000:02:02.0: irq 9, io mem 0xa0000900 [ 3.001695] e1000e 0000:06:00.0: setting latency timer to 64 [ 3.002093] e1000e 0000:06:00.0: irq 26 for MSI/MSI-X [ 3.002112] e1000e 0000:06:00.0: irq 27 for MSI/MSI-X [ 3.002128] e1000e 0000:06:00.0: irq 28 for MSI/MSI-X [ 3.063146] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.063166] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.063182] usb usb3: Product: OHCI Host Controller [ 3.063195] usb usb3: Manufacturer: Linux 2.6.32-5-686 ohci_hcd [ 3.063209] usb usb3: SerialNumber: 0000:02:02.0 [ 3.063906] usb usb3: configuration #1 chosen from 1 choice [ 3.064291] hub 3-0:1.0: USB hub found [ 3.064339] hub 3-0:1.0: 1 port detected [ 3.064599] sdhci-pci 0000:02:04.1: SDHCI controller found [8086:880a] (rev 1) [ 3.064643] sdhci-pci 0000:02:04.1: enabling device (0000 -> 0002) [ 3.064670] sdhci-pci 0000:02:04.1: can't find IRQ for PCI INT C; please try using pci=biosirq [ 3.064688] sdhci-pci 0000:02:04.1: Invalid iomem size. You may experience problems. [ 3.112645] sdhci-pci 0000:02:04.1: setting latency timer to 64 [ 3.112714] sdhci-pci: probe of 0000:02:04.1 failed with error -16 [ 3.112857] ohci_hcd 0000:02:02.1: setting latency timer to 64 [ 3.112876] ohci_hcd 0000:02:02.1: OHCI Host Controller [ 3.112930] ohci_hcd 0000:02:02.1: new USB bus registered, assigned bus number 4 [ 3.112995] ohci_hcd 0000:02:02.1: irq 9, io mem 0xa0000a00 [ 3.171692] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.171713] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.171729] usb usb4: Product: OHCI Host Controller [ 3.171742] usb usb4: Manufacturer: Linux 2.6.32-5-686 ohci_hcd [ 3.171756] usb usb4: SerialNumber: 0000:02:02.1 [ 3.177265] usb usb4: configuration #1 chosen from 1 choice [ 3.177738] hub 4-0:1.0: USB hub found [ 3.177795] hub 4-0:1.0: 1 port detected [ 3.178125] ohci_hcd 0000:02:02.2: setting latency timer to 64 [ 3.178144] ohci_hcd 0000:02:02.2: OHCI Host Controller [ 3.178195] ohci_hcd 0000:02:02.2: new USB bus registered, assigned bus number 5 [ 3.178261] ohci_hcd 0000:02:02.2: irq 9, io mem 0xa0000b00 [ 3.179215] 0000:06:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:00:24:ce:45:75 [ 3.179233] 0000:06:00.0: eth1: Intel(R) PRO/1000 Network Connection [ 3.179335] 0000:06:00.0: eth1: MAC: 3, PHY: 8, PBA No: ffffff-0ff [ 3.179489] e1000e 0000:0a:00.0: setting latency timer to 64 [ 3.179892] e1000e 0000:0a:00.0: irq 29 for MSI/MSI-X [ 3.179911] e1000e 0000:0a:00.0: irq 30 for MSI/MSI-X [ 3.179927] e1000e 0000:0a:00.0: irq 31 for MSI/MSI-X [ 3.243158] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.243177] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.243193] usb usb5: Product: OHCI Host Controller [ 3.243207] usb usb5: Manufacturer: Linux 2.6.32-5-686 ohci_hcd [ 3.243220] usb usb5: SerialNumber: 0000:02:02.2 [ 3.243899] usb usb5: configuration #1 chosen from 1 choice [ 3.244277] hub 5-0:1.0: USB hub found [ 3.244325] hub 5-0:1.0: 1 port detected [ 3.244649] ohci_hcd 0000:02:08.0: setting latency timer to 64 [ 3.244668] ohci_hcd 0000:02:08.0: OHCI Host Controller [ 3.244730] ohci_hcd 0000:02:08.0: new USB bus registered, assigned bus number 6 [ 3.244794] ohci_hcd 0000:02:08.0: irq 10, io mem 0xa0004400 [ 3.306956] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.306976] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.306991] usb usb6: Product: OHCI Host Controller [ 3.307005] usb usb6: Manufacturer: Linux 2.6.32-5-686 ohci_hcd [ 3.307018] usb usb6: SerialNumber: 0000:02:08.0 [ 3.307681] usb usb6: configuration #1 chosen from 1 choice [ 3.308067] hub 6-0:1.0: USB hub found [ 3.308113] hub 6-0:1.0: 1 port detected [ 3.308428] ohci_hcd 0000:02:08.1: setting latency timer to 64 [ 3.308447] ohci_hcd 0000:02:08.1: OHCI Host Controller [ 3.308497] ohci_hcd 0000:02:08.1: new USB bus registered, assigned bus number 7 [ 3.308562] ohci_hcd 0000:02:08.1: irq 10, io mem 0xa0004500 [ 3.314724] 0000:0a:00.0: eth2: (PCI Express:2.5GB/s:Width x1) 00:00:24:ce:45:76 [ 3.314743] 0000:0a:00.0: eth2: Intel(R) PRO/1000 Network Connection [ 3.314846] 0000:0a:00.0: eth2: MAC: 3, PHY: 8, PBA No: ffffff-0ff [ 3.315004] e1000e 0000:0b:00.0: setting latency timer to 64 [ 3.315426] e1000e 0000:0b:00.0: irq 32 for MSI/MSI-X [ 3.315444] e1000e 0000:0b:00.0: irq 33 for MSI/MSI-X [ 3.315461] e1000e 0000:0b:00.0: irq 34 for MSI/MSI-X [ 3.341172] Clocksource tsc unstable (delta = 84044510 ns) [ 3.341361] Switching to clocksource jiffies [ 3.365653] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.365672] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.365688] usb usb7: Product: OHCI Host Controller [ 3.365701] usb usb7: Manufacturer: Linux 2.6.32-5-686 ohci_hcd [ 3.365715] usb usb7: SerialNumber: 0000:02:08.1 [ 3.366429] usb usb7: configuration #1 chosen from 1 choice [ 3.366812] hub 7-0:1.0: USB hub found [ 3.366859] hub 7-0:1.0: 1 port detected [ 3.367175] ohci_hcd 0000:02:08.2: setting latency timer to 64 [ 3.367194] ohci_hcd 0000:02:08.2: OHCI Host Controller [ 3.367245] ohci_hcd 0000:02:08.2: new USB bus registered, assigned bus number 8 [ 3.367312] ohci_hcd 0000:02:08.2: irq 10, io mem 0xa0004600 [ 3.426289] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.426308] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.426324] usb usb8: Product: OHCI Host Controller [ 3.426337] usb usb8: Manufacturer: Linux 2.6.32-5-686 ohci_hcd [ 3.426350] usb usb8: SerialNumber: 0000:02:08.2 [ 3.427043] usb usb8: configuration #1 chosen from 1 choice [ 3.427429] hub 8-0:1.0: USB hub found [ 3.427477] hub 8-0:1.0: 1 port detected [ 3.442463] 0000:0b:00.0: eth3: (PCI Express:2.5GB/s:Width x1) 00:00:24:ce:45:77 [ 3.442483] 0000:0b:00.0: eth3: Intel(R) PRO/1000 Network Connection [ 3.442586] 0000:0b:00.0: eth3: MAC: 3, PHY: 8, PBA No: ffffff-0ff [ 3.530428] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.542486] ata1.00: ATA-8: KS-S12-S50, , max UDMA/133 [ 3.542508] ata1.00: 97696368 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 3.552546] ata1.00: configured for UDMA/133 [ 3.566016] scsi 0:0:0:0: Direct-Access ATA KS-S12-S50 n/a PQ: 0 ANSI: 5 [ 3.885567] ata2: SATA link down (SStatus 0 SControl 300) [ 3.958890] sd 0:0:0:0: [sda] 97696368 512-byte logical blocks: (50.0 GB/46.5 GiB) [ 3.959281] sd 0:0:0:0: [sda] Write Protect is off [ 3.959302] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.959470] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.960356] sda: sda1 sda2 < sda5 > [ 3.964953] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.112589] PM: Starting manual resume from disk [ 4.112609] PM: Resume from partition 8:5 [ 4.112619] PM: Checking hibernation image. [ 4.112762] PM: Error -22 checking image file [ 4.112762] PM: Resume from disk failed. [ 4.207001] kjournald starting. Commit interval 5 seconds [ 4.207001] EXT3-fs: mounted filesystem with ordered data mode. [ 4.604100] udev[221]: starting version 164 [ 4.953097] input: PC Speaker as /devices/platform/pcspkr/input/input0 [ 4.953559] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 5.020005] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.128901] Error: Driver 'pcspkr' is already registered, aborting... [ 6.338829] Adding 2024148k swap on /dev/sda5. Priority:-1 extents:1 across:2024148k SS [ 6.439269] EXT3 FS on sda1, internal journal [ 6.623600] loop: module loaded [ 7.311779] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.010659] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 9.010679] 0000:05:00.0: eth0: 10/100 speed: disabling TSO [ 9.011783] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.789542] eth0: no IPv6 routers present root@debian:~# reboot  Broadcast message from root@deUsing makefile-style concurrent boot in runlevel 6. Stopping deferred execution scheduler: atd. Stopping MTA: exim4_listener. Stopping web server: apache2 ... waiting . Stopping domain name service: lwresd. Stopping domain name service...: bind9 waiting for pid 693 to die. Asking all remaining processes to terminate...done. All processes ended within 1 seconds....done. Stopping enhanced syslogd: rsyslogd. Stopping portmap daemon.... Stopping NFS common utilities: statd. Deconfiguring network interfaces...Internet Systems Consortium DHCP Client 4.1.1-P1 Copyright 2004-2010 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:00:24:ce:45:74 Sending on LPF/eth0/00:00:24:ce:45:74 Sending on Socket/fallback DHCPRELEASE on eth0 to 10.32.87.1 port 67 done. Cleaning up ifupdown.... Saving the system clock. Deactivating swap...done. Will now restart. [ 55.018648] Restarting system. POST: 012345